Ends are always made to the customer's precise requirements. The most common end models can be found in our standard models.
Tank heads and end structures
We are experts in end production. We manufacture demanding end structures for a wide range of applications (e.g. pressure vessel ends, oil tank ends and other convex products).
Minimum diameter 216 mm, maximum 5,000 mm. We manufacture ends of more than 5 metres in the form of segments. The largest hemispheres we can deliver are 10.6 metres in diameter.
Thanks to our excellent machinery, we are able to manufacture both small and large batches cost-effectively.
Standard Shapes
We manufacture products to meet your exact needs
Semi ellipsoidal head
DIN 28013, Korbogen SS 482
Du 195–4000 mm
Material strength 1,5–30 mm
Torispherical end
Klöpperform
DIN28011, SS 2634
Du 375–5000 mm
Material strength 3–30 mm
Spherical
Du 250–5500 mm
Material strength 2–40 mm
Cone
Material strength 2–30 mm
After treatments for ends:
- Chamfering
- Installation of openings
- Sand/shot blasting
- Heat treatment
- Sanding
- Pool/spray pickling
- Painting
Welding bevels
Straight edge
Exterior bevel "YA"
Interior bevel "YI"
X-bevel "DY"
Internal bevel + external elevation
External bevel + external elevation
Internal bevel + internal elevation
